Vrod headlight cowl parts
by Editor on 06/15/19
I have received a number of messages/emails on what was needed to install this cowl for a 2006 Night Rod onto a 02-06 VRSC
You can use the stock Harley-Davidson mount p/n: 69271-06 but I felt that it made the fairing sit to low on my bike showing too much of the clamshell.
The carbon fiber nose faring/cowl is made by MDI Carbon Fiber
The DX-TL-7 headlight bracket that allowed me to use a 7 inch headlight instead of the 5 3/4 is made by Wayne Motorsports
The 7 inch LED headlight recommended by Wayne Motorsports is the Truck-Lite 27270C but I decided to try the Phase 7 knock off that saved me approximately $200 cdn. But, in order to make that light fit I had to remove some of the middle bracing with a dremal. I wasn't worried about structural integrity because Tim's bracket is very well made.
A stock headlight seal from Harley-Davidson was need between the headlight and cowl. part number: 68134-97
A H4 to H9 H11 headlight adapter was also need, the only one I could find was for a 2014 RoadGlide but I had to remove the H9 H11 sockets because they had different alignment docks inside the sockets than my 03.
Comments (0)
