Vrod Rear Axle assembly 41541-01 for sale
by Editor on 01/10/21
2003 Harley-Davidson VRSCA Vrod
Rear Axle assembly part number: 41541-01
with rear axle adjuster, spacer & nut
This came off a bike with only 29,000 kilometres.
Price $110USD plus shipping & PayPal fees. If you're interested please click on the contact at the bottom of this page
Motorcycle monopod cam
by Editor on 01/09/21
Our carbon fiber monopod cam setup has been a great addition to our camera angles for both video and still shots. This still image was pulled off the video footage we shot on the Icefields Parkway shortly after leaving Jasper.
Vrod engine harness. Part Number: 70155-03 for sale
by Editor on 01/08/21
Genuine Harley-Davidson Vrod engine harness. Part Number: 70155-03
I'm selling this one of my 2003 VRSCA that had only 29,000 kms.
price: $35USD plus shipping & paypal fees.
If you're interested please click on the contact at the bottom of this page
Vrod starter motor assembly. Part Number: 31717-01K for sale
by Editor on 01/07/21
Genuine Harley-Davidson Vrod starter motor assembly. Part Number: 31717-01K
I'm selling this one of my 2003 VRSCA that had only 29,000 kms.
price: $125USD plus shipping & paypal fees.
If you're interested please click on the contact at the bottom of this page
VROD oil cooler lines for sale
by Editor on 01/06/21
Genuine Harley-Davidson Vrod oil cooler lines. I'm selling this one of my 2003 VRSCA that had only 13,000 kms.
price: $70USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
VROD oil cooler for sale
by Editor on 01/05/21
Genuine Harley-Davidson Vrod oil cooler
I'm selling this one of my 2003 VRSCA that had only 13,000 kms.
price: $195USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page.
THIS ITEM HAS BEEN SOLD
VROD Fuel Rail Assembly. Part Number: 27662-01B
by Editor on 01/04/21
For sale: Genuine Harley-Davidson VROD Fuel Rail Assembly. Part Number: 27662-01B
I'm selling this one of my 2003 VRSCA that had only 29,000 kms. Comes with injectors, rubber boots and clamps as seen in picture.
price: $170USD plus shipping & paypal fees.
If you're interested please click on the contact at the bottom of this page.
VROD Throttle Body Assembly. Part Number: 27657-01
by Editor on 01/03/21
SOLD: Genuine Harley-Davidson VROD Throttle Body Assembly.
Part Number: 27657-01 I'm selling this one of my 2003 VRSCA that had only 29,000 kms. Comes with idle air control motor and fuel pressure regulator as seen in picture.
SOLD
VROD New Years Eve
by Editor on 12/31/20
Hang in there folks we're almost through 2020...
Happy New Years Eve everyone, all the very best to you and yours in 2021 and thank you for watching VRIDETV.
The Holidays
by Editor on 12/24/20
Dec 24 - 31, 2020: Merry Christmas & Happy New Year everyone, all the very best to you in 2021.
Thank you for being apart of VRIDETV
First day of Winter
by Editor on 12/21/20
It may be the first day of winter but I'm already thinking of going back to the Icefields Parkway this summer!
Harley Davidson Vrod winter storage
by Editor on 12/19/20
Our 2003 Harley Davidson carbon fiber VROD is all cleaned up, lifted off the ground and strapped in place. Time to throw the cover on and wait for Spring. Oh who am I kidding, sure I'll find something to do on it!
VROD WHEELS before and after
by Editor on 12/17/20
Here's a before and after picture of the stock 2003 Harley-Davidson VROD wheels, a lot of time & elbow grease went into these but I think it was worth it.
VROD Front and Rear Brake Calipers for sale
by Editor on 12/16/20
For sale: Genuine Harley-Davidson VROD Front and Rear Brake Calipers
Front right brake caliper assembly: part number: 44451-01C
Front left brake caliper assembly: part number: 44452-01C
Rear caliper assembly: part number: 4457-01B
These came off a 2003 Vrod with only 29,000kms
$350 USD for all three + shipping and PayPal fees.
contact info bottom of this page.
VROD Wheels
by Editor on 12/15/20
These wheels have been on a journey, sent to Ruthless Designz in Myrtle Beach to have them machined with their 930 design, then I broke out the elbow grease and polished them myself sanded the rotors, sanded and polished the pulley and compensator bowl. Here they are all assembled, torqued to spec and ready to mount on our 2003 Harley-Davidson VROD carbon fiber camera bike.
Trev Deeley Motorcycles customer service
by Editor on 12/12/20
HUGE SHOUT OUT to the folks at Trev Deeley Motorcycles & TDMC Customs for impeccable customer service!
Thank you Chris, YookieMonster, Lorne, Lennard & the rest of the TDMC team!
You guys & gals are AWESOME!
I bought my first Vrod from Trev Deeley Motorcycles back in 2003 and was actually on the waiting list in 2002. That's the bike that Diane and I rode across Canada in 2006, we were the first people to do that ride coast to coast on a Vrod! That trip was 18,786 kilometers, 2 up, no support vehicle and with the stock 3.7 gallon fuel tank.
VROD wheel parts
by Editor on 12/10/20
Update on the wheels for the 2003 Harley Davidson Carbon Fiber Vrod build.
Wheels were cut by Ruthless Designz with their 930 design, then I polished them by hand. Then I hand sanded and polished the pulley and compensator bowl. Thought I was done until inspecting the rotors and decided to sand down all the inside edges exposing the bare metal which I then coated with clear coat to prevent oxidation. Next, all the rotor bolts & compensator bolts were cleaned with alcohol completing the final prep work prior to assembly.
Vrod rear pulley front and back views
by Editor on 12/09/20
Final stages of sanding and polishing on this Vrod rear pulley. When working on the backside I decided to sand and polish that area because it can be seen at certain angles when looking through the slots and in the reflection of the wheel. The outer ring is made of steel, not aluminum so I left it as is and the other area I left raw will be covered up by the compensator bowl.
Tricks to polish aluminium wheels
by Editor on 12/07/20
Front wheel is done, now it's the rear wheel's time to shine.
Made up a DIY wheel stand with two chairs and a broomstick to do the final polish on this rear wheel before installing it on the bike.
DIY wheels stand
by Editor on 12/04/20
Made up a DIY wheel stand with two chairs and a broomstick to do the final polish on this front wheel before installing it on the bike.
